Pumps from base of container – all
contents emptied.
Built To Last – long lasting high
quality construction.
Will work with any container 36'
(91.4cm) or less in height.
“Is my
liquid too thick”…How to test it.
Make a cone using a standard 8 ½” by 11” (215mm
x 280mm) piece of printer paper.
Roll a cone so the length (height) of the cone
is the 8 ½” (215mm) dimension. The top opening should be about
3” (76mm) across and the hole must be ½” (13mm) across.
Put a piece of tape on the overlap to hold the
cone together.
Hold the cone loosely in your hand (Do Not
Squeeze, that’s cheating :o))
Put 8 ounces (236ml) of your liquid into the
cone.
Start counting the drops (globs) of liquid as it
runs out.
Counting; one thousand one, one thousand two,
one thousand three, etc.; will be close to a second. If you are
not sure, time yourself or you can have someone keep time for
you.
The pump will pump the liquid if is runs out at
about 1 second per glob or less.
More time than that is doubtful. If you want to
make doubly sure, send at least 24 ounces of material to us, and
we will physically test it in the pump.
Pumps from base of container – all
contents emptied.
Built To Last – long lasting high
quality construction.
Will work with any container that is
16.5" (419mm) or less in height.
Also, works with 5 gal (19 L) and 8
gal (30 L) jugs as well as 6 gal (23 L) buckets
“Is my liquid too thick”…How to
test it.
Make a cone using a standard 8 ½” by 11” (215mm
x 280mm) piece of printer paper.
Roll a cone so the length (height) of the cone
is the 8 ½” (215mm) dimension. The top opening should be about
3” (76mm) across and the hole must be ½” (13mm) across.
Put a piece of tape on the overlap to hold the
cone together.
Hold the cone loosely in your hand (Do Not
Squeeze, that’s cheating :o))
Put 8 ounces (236ml) of your liquid into the
cone.
Start counting the drops (globs) of liquid as it
runs out.
Counting; one thousand one, one thousand two,
one thousand three, etc.; will be close to a second. If you are
not sure, time yourself or you can have someone keep time for
you.
The pump will pump the liquid if is runs out at
about 1 second per glob or less.
More time than that is doubtful. If you want to
make doubly sure, send at least 24 ounces of material to us, and
we will physically test it in the pump.
New Concept in Power Pumps . . .
Click Image to Enlarge
Universal Motor Head
The Universal Motor Head is for use with the Pump Tubes shown below.
The easiest and fastest way to pump out of drums, tanks, barrels, buckets and pots. Just a few turns and this Motor Head can switch to the next Pump Tube in seconds.
Description
Save money by using one Motor Head for several pumps.
A light, easily handled, high-performance pump head, for almost all types of slightly viscous, aggressive and non-flammable liquids.
No more waiting for the pump to drain before switching drums, just move the motor.
No more need to flush out the pump, just move the motor.
No maintenance.
Specifications
Universal motor, 120 volt, 640 watt, 60hz., 0.85 HP.
Note: 220 volt available, order below.
Will pump up to 45 gallons (170L) per minute.
Delivery head up to 31 feet (9.5m)
Weight approx. 6.5 lbs. (3kg)
Standard, with extra long, 16' (4.9m) cord.
Bipolar on/off switch with single pole thermal over current release.
The Ultimate Pump for our industry. Switch from one drum to the other with one motor while leaving the Pump Tube in the Barrel. Handles, many types of liquids, even caustic soda.
Description
Save money by using one Motor Head for several pumps.
Please note: the item we are describing is the Pump Tube that goes in the drum, the Motor Head is designed to move from one pump tube to the other. Read Motor Head description.
The Poly Pump Tube will pump up to 23 gallons per minute (87L)
Will handle liquids, to temperatures as high as 122F (50C) and pump liquids up to 900cps. Constant duty, 500cps.
Note: cps or centipoise. Centipoise is the measurement used for the viscosity of a liquid. Examples; SAE 50 weight oil is 540cps, soybean oil is 160cps, honey is 3000cps).
High chemical resistance; will pump, caustic soda, vegetable oils, liquid soap, etc. Not to use with alcohol or petroleum products (see Stainless Pump Tube). If any liquid you want to pump is in question please ask.
Maintenance and replacement is extremely easy on these versatile pumps. No special tools required.
See our versatile dispensing nozzle for a great way to dispense from the Drum Pump Tube.
Use with plastic, or metal barrels.
You can even pump out of shorter tanks, buckets, etc. as the Pump Tube allows you to sit right on the bottom of the drum or container.
Included with every Pump Tube is a Drum / Barrel, Bung Adaptor for a standard 2" NPT, bung. Just screw into your drum and slip in the Pump Tube.
Specifications
Tube diameter 41mm (1.6")
Temperatures to 122F (50C)
Pump Tube material; Polypropylene
Impeller; Polypropylene
Discharge connection, 3/4" (19mm)
Length is 39" (99cm). Other available lengths are, 27" (69cm), 47" (119cm) and lengths up to 78" (198cm).
The Ultimate Pump for our industry. Switch from one drum to the other with one motor while leaving the Pump Tube in the Barrel. Handles Alcohol, caustic soda, petroleum products.
Description
Save money by using one Motor Head for several pumps.
Please note: the item we are describing is the Pump Tube that goes in the drum, the Motor Head is designed to move from one pump tube to the other. Read Motor Head description.
The Stainless Steel Pump Tube will pump up to 29 gallons per minute (110L)
Will handle liquids, to temperatures as high as 212F (100C) and pump liquids up to 900cps. Constant duty, 500cps.
Note: cps or centipoise. Centipoise is the measurement used for the viscosity of a liquid. Examples; SAE 50 weight oil is 540cps, soybean oil is 160cps, honey is 3000cps).
High chemical resistance; will pump, caustic soda, vegetable oils, liquid soap, alcohol and petroleum products. If any liquid you want to pump is in question please ask.
Maintenance and replacement is extremely easy on these versatile pumps. No special tools required.
See our versatile dispensing nozzle for a great way to dispense from the Drum Pump Tube.
Use with plastic, or metal barrels.
You can even pump out of shorter tanks, buckets, etc. as the Pump Tube allows you to sit right on the bottom of the drum or container.
Included with every Pump Tube is a Drum / Barrel, Bung Adaptor for a standard 2" NPT, bung. Just screw into your drum and slip in the Pump Tube.
Specifications
Tube diameter 41mm (1.6")
Temperatures to 212F (100C)
Pump Tube material; Stainless Steel
Impeller; ETFE (Ethylene TetrafluoroEthylene)
Discharge connection, 1" (25mm)
Length is 39" (99cm). Other available lengths are, 27" (69cm), 47" (119cm) and lengths up to 78" (198cm).
Weight 39", 11# (5kg).
Warranty 1 year
Click Image to Enlarge
HANDcraft™
Poly Pump Nozzle Kit
This unit
attaches to the Poly Drum Pump Tube (Above)
All connectors necessary for hose and Dispensing Nozzle.
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone.
Click Image to Enlarge
HANDcraft™
Stainless Pump Nozzle Kit
This unit
attaches to the Stainless Drum Pump Tube (Above)
All connectors necessary for hose and Dispensing Nozzle.
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone.
Want an inexpensive easy way to hand fill your bottles? Dispense ¼ oz, ½ , ¾ or 1 oz at a time from a standard gallon pail.
Description
1 oz Lotion Transfer Pump has 11” tube length and a 38 mm cap.
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone.
With the calibrated plunger, you select the quantity you wish to dispense up to 1 oz.
Dispense your lotions directly from your 5 gallon pail into your bottles! Select any of the 4 calibrated settings: ¼ oz, ½ oz, ¾ oz or 1 oz.
Description
HANDcraft™ 1 oz Lotion Transfer Pail Pump has 17” tube length.
With the calibrated plunger, you select the quantity you wish to dispense up to 1 oz.
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone.
Transfer your lotions or liquids easily and
quickly. Choose from the 2 oz, 4, 6 or 8 oz
settings. Remember this is not going to be nearly as
accurate as our Easy Fill Bottle Filler but is
definitely better than trying measure the flow from
our larger pumps. This is a good, inexpensive start
for the Handcrafter.
Description
HANDcraft™ 8 oz Lotion Transfer Drum Pump. Will pump most liquids
up to the consistency of an average hand lotion or sun screen.
Note: If you are not
sure it will pump your product, send a 16oz sample to
us. See bottom of this page for address. We will not be
able to tell you over the phone.
With the calibrated plunger, you select the quantity you wish to dispense up to 8 oz.
* All specials are for a limited time only. Offers cannot be
combined with any other discount, offer, promotion or special
incentive program and are not valid on: (a) prior purchases, (b)
prior quotes or offers. Void where prohibited.
Prices are in U.S. dollars (USD). All prices and product
availability subject to change without notice. Unless noted, prices
do not include shipping and applicable sales taxes.
Please call or e-mail us with any questions or to place an order.
